In the protection process of the plastic floor, if the […]
In the protection process of the plastic floor, if the surface is to be laid, the temperature after the pasting should be controlled between 15 degrees Celsius and 30 degrees Celsius, and the humidity should be less than 80%. In this environment, natural maintenance is generally required. The time cannot be less than 24 hours. After the paving is completed, the surface of the vinyl floor should be wiped clean with a rag, and then the entire surface of the vinyl floor should be protected with a rag. Apply twice to three times. When paving the plastic floor, all operators should wear clean soft-soled shoes to prevent sand or dust on the sewage surface.
When working on the wall and the top of the plastic floor, you can use climbing ladders or stools and other wrapping materials for comprehensive protection. In the actual protection process of the plastic floor, high-temperature appliances can also be used for overall processing, and it cannot be directly contacted with the board surface to avoid burns. For this kind of product produced by the plastic floor manufacturer, if it is to be protected, the entire surface layer and the base layer are adhered firmly without any hollowing phenomenon, and the surface flatness must be ensured.